Stacks Image 354

MALCOM DS-10S DIP TESTER FOR SELECTIVE SOLDERING

The Malcom DS-10S Dip Tester for Selective Soldering measurement system. Attain vital soldering performance information with just one device.
FEATURES & BENEFITS:
  • The self contained DS-10S rides along the conveyor like a PCB.
  • Measures the record's maximum PCB topside preheat temperature.
  • Confirms flux and solder levels.
  • Measures and records the maximum temperature and dwell times of both solder waves.
  • Programable temperature profiles make it possible to monitor 50ms sampling temperatures of the preheat & solder temperature sensors, in addition to the conventional management items.
SPECIFICATIONS:
GENERAL SPECIFICATIONS
ITEM SPECIFICATION
Cold Contact Point Compensation Automatic compensation w/ platinum temperature measuring resistor
Ambient Temperature 5 min. or less is OK at ambient temperature of 150°C
Battery (1) Two (2) AAA batteries
Usable Time More than 10 continuous hours
Life of Sensor Mounting Plate More than 5,000 times at soldering temperature of 250°C and dip time of 5 sec.
Outer Dimensions (mm) 78 (W) x 214 (D) x 43.6 (H)
Weight 820g (w/o battery)
MEASUREMENT DATA SPECIFICATIONS
ITEM SENSOR DISPLAY METHOD MEASUREMENT RANGE ACCURACY / CONTENTS
Soldering Temperature K Sheath
Thermocouple
Digital LCD 3-digit 0 ~ 300°C ± 1°C
Temperature on the
Topside of Board
K Tehermocouple 50 ~ 300°C ± 1°C
Dip Time Electrode 0 ~ 10.0 sec. ± 0.2 sec.

* Specifications subject to change without notice.